• Erichsen Richard posted an update 2 years, 6 months ago

    Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and then for other events beyond day-to-day use. Protecting flooring is practical and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture cost lots of money in replacement and repairs. This post describes surface protection products for floors so that you can make informed alternatives on the very best product for your needs. Forms of Protection Packaging:

    Floor protection merchandise is commonly packaged as either:

    (1) Products through the roll: Included in this are common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased through the roll are commonly measured in depth by mils (e.g., 2.5 mils thick as much as 48 mils thick).

    (2) Products through the sheet: Such as corrugated plastic, masonite, as well as other rigid protection. Protective materials purchased through the sheet are commonly measured in thickness through the inch (e.g., 1/4-inch thick) and normally come as 4 feet by 8 feet.

    Paper protection would work for all hard surfaces and resilient surfaces but doesn’t work well to guard carpets as it can tear when flexing under footsteps. Paper items are breathable to ensure that glue fumes and cement curing vapors can escape. One disadvantage to paper products since they require tapes to secure them to flooring and tapes can often leave adhesive residue when removed. Common paper protection products include:

    Polyethylene (PE) films can be bought as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so they really should not be suited for any floors which are curing. Gadget amazing benefits of polyethylene films are that films will flex and contour for them to be used on carpets along with hard surfaces. These films don’t offer any impact protection and therefore are normally rated abbreviated term usage of 30 to 3 months only. Polyethylene films are designed for one-time use and do not use recycled materials driving them to an unhealthy choice in sustainable protection. Protection films can be purchased in various adhesion "tack". Hard surface protection films may lower tack and color than carpet protection which uses a more aggressive glue to support onto carpet fibers successfully.

    Plywood and Masonite are generally used as protection on commercial projects with plenty of visitors. Masonite is often a wood product created from wood fibers unlike plywood that’s an actual sheet of thin wood. Both plywood and Masonite can be bought within the standard size 4 feet by 8 feet and they are more expensive per sq . ft . than paper or polyethylene products. Masonite is often 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a various floor types and still provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they are bulky to carry and store. These wood sheets needs to be utilized on the top of a softer protection such as a rolled textile while they easily scratch flooring. These sheets are very effective to shield carpet since they prevent wrinkles when rolling heavy loads in the carpet. Plywood and Masonite don’t offer moisture protection and can be harder to reduce to size than other protection types.

    Textile products are commonly made of recycled cloth. Additionally, these rolled protection products will have amazing benefits like skid resistant backings or breathable plastic liners. For wooden floors, these specialty textile rolls are strongly recommended because they are breathable, skid resistant, reusable, often leakproof and straightforward to slice to size.

    For more information about corex see our new internet page:


Skip to toolbar